-
Your shopping cart is empty!
Total : $0.00
APW5 PSU, 1300W-2600W
$120.00
Availability: In Stock
1. Power cord is not included with the APW5. It requires a C13 cord with a minimum current of 10A. We advise all users to purchase it separately according to their local wall-socket standard. 2. The APW5 can power two Antminer R4 miners with a 220V input but NOT more than one Antminer R4 with a 110V input. 3. The APW5 is compatible with one Antminer S9 but ONLY with a 220V input. Wit...
This product has a minimum quantity of 2
1. Power
cord is not included with the APW5. It requires a C13 cord with a
minimum current of 10A. We advise all users to purchase it separately
according to their local wall-socket standard.
2. The APW5 can power two Antminer R4 miners with a 220V input but NOT more than one Antminer R4 with a 110V input.
3. The APW5 is compatible with one Antminer S9 but ONLY with a 220V
input. With a 110V input, we do NOT recommend that APW5 be used to run
an Antminer S9.
4. The APW5 comes with 7 pairs of six-pin PCiE connectors i.e. a total of 14 six-pin PCiE connectors.
Specificatoins
|
Output |
DC Voltage |
12.25V |
|
Rated Current (220V input) |
216A |
|
|
Rated Power (220V input) |
2600W |
|
|
Rated Current (110V input) |
108A |
|
|
Rated Power (110V input) |
1300W |
|
|
Ripple & Noise |
<1% |
|
|
Voltage Regulation |
<2% |
|
|
Source Regulation |
<1% |
|
|
Load Regulation |
<1% |
|
|
Setup, Rise Time |
<5S |
|
|
Power off Protection Trip Time |
>10mS |
|
|
Interface Type |
7pairs of 6pin PCI-E connectors. 380mm length for each PCI-E cable. |
|
|
Input |
Voltage Range |
90-265V AC |
|
Current Range |
10.5-16.5A |
|
|
Starting Voltage |
100-240V AC |
|
|
Frequency Range |
47-63Hz |
|
|
Power Factor |
>0.95(full load) |
|
|
Leakage Current |
<1.5mA (220V 50Hz) |
|
|
Protection
|
Low-voltage Input |
90-100V AC |
|
Output Short Circuit |
Tags: PSU,
More,
PSU & More,
APW5,
PSU,
,
1300W-2600W,
APW5 PSU,
1300W-2600W buy in
|
